PV String Testing
Polarity · Voc · Isc · Riso — DC string tests per IEC 62446-1
← Choose another report type
Setup
The company that ran the tests and issues the report. Shown on the cover and in the confidentiality note.
Plant & report details
Fills the report's cover page and installation identification section.
The logo of the company above, for the report cover. Left blank, the cover has no logo — never a default one.
Technical team
Initials shown in the document control table and the technical team table.
Module datasheet
Used to calculate the expected Voc/Isc values (Case A) and the classification thresholds.
Reproduced in full in an annex of the report. Without it, that annex is left out.
Equipment and files
Only used for HT .xls exports, which don't record the model. Instrument .ZST files and Seaward files are recognised on their own.
Goes on the equipment ficha (§4.1). Not needed for HT .ZST files — they record it.
Straight from the instrument: HT .ZST (or its .xls export), Seaward PV:1525 .xlsx, Seaward PV150+ .csv — or a .zip with a whole folder. The instrument is recognised from each file, and everything is combined into a single report.
PDF or photo. Reproduced in full in an annex of the report. Without a certificate, the report says the calibration was not provided.
The report only states the calibration was valid on the test dates when this date is on or after the last test.
Name each photo after its string, as it appears in the report — e.g. "12.17.21.jpg" for inverter 12.17, string 21 ("12.17.21 (2).jpg" for a second one). Photos of a non-compliant string are linked to its NC. Without photos, the photographic annex is left out.
String names — optional

By default the report uses the names recorded by the instrument. To use your own names — and to group strings by your inverters — download the naming table, fill in the yellow columns (Inverter, Combiner box, String, Exclude) and upload it below. You can also mark readings to exclude.

Leave the pattern empty to pre-fill with the instrument's own names. With a pattern, names follow measurement order: inverter 1, box 1.1, string 1.1.1…
Rows are matched by the Key column, so you can sort or filter the table freely.
Advanced
Only used when the file doesn't identify the inverter/junction box.
Technician's call — never calculated automatically. Applies to the whole campaign, for now.